LED flood light suitable for high temperature 135°C

Application: Automobile factory, paper mill, steel factory, environmental test room, thermostatic chamber, Robodrill, sewerage facility, etc

Can withstand high temperatures of 135°C

Using high temperature resistance components, and lower the LED junction temperature by special design, enabling the use in high temperature environment by suppressing the deterioration of the LED. 

 

*External LED driver must be put out of high temperature environment.

Replace HID 300-700W

By using high efficiency LED 120 lm / W, it can be replaced to conventional HID lamp 300-700 W with low power consumption.

 

Tempered Glass

Tempered glass does not discolor by ultraviolet rays, oil and salt.

 

Wide beam angle

Wide beam angle can illuminates a wide range uniformly, so it is suitable for high ceiling factories and warehouses.

 

Chemical resistant paint (optional)

Adding special surface coating excellent in chemical resistance makes it suitable for use in chemical plants.

 

HD series Line-up

Type

Model no.

Power

Luminous

flux

Operating temperature

HD100

HD100 100W 12000lm -40℃~+50℃
HD100-HT60 90W 10800lm -40℃~+60℃
HD100-HT80 75W 9000lm -40℃~+80℃
HD100-HT100 55W 6600lm -40℃~+100℃
HD100-HT120 35W 4200lm -40℃~+120℃
HD100-HT135 30W 3500lm -40℃~+135℃

HD150

HD150-HT60 150W 18000lm -40℃~+50℃
HD150-HT60 135W 16200m -40℃~+60℃
HD150-HT80 110W 13500lm -40℃~+80℃
HD150-HT100 80W 9900lm -40℃~+100℃
HD150-HT120 60W 7200lm -40℃~+120℃
HD150-HT135 45W 5400lm -40℃~+135℃

HD200

HD200 200W 24000lm -40℃~+50℃
HD200-HT60 180W 21600lm -40℃~+60℃
HD200-HT80 150W 18000lm -40℃~+80℃
HD200-HT100 110W 13200lm -40℃~+100℃
HD200-HT120 80W 9900lm -40℃~+120℃
HD200-HT135 60W 7200lm -40℃~+135℃

Check the detailed specs below links >>

About chemical resistance option

Chemical resistant paint --- Test result

Specular glossiness

 

Pencil scratch value

 

Adhesion

 

Impact resistance

 

 

Boiling water resistance


Acid resistance

 


Alkali resistance

 


Salt spray

 

 


Moisture resistance


Accelerated weathering resistance Gloss retention

 


      Gloss retention


Outdoor weather resistance      Gloss retention

91

 

H

 

100/100


40cm

 


No abnormality


No abnormality

 


No abnormality

 


General part:No abnormality


Cut part: blister 0~1.0mm


No abnormality

 


80% and more

 


90% and more

 


80% and more

60 degrees

 

graze

 

1mm  Cross-cut


DuPont method R6.35mm 500g


Immersion (3 hours)


5% sulfuric acid immersion 20℃×24hours


5% NaOH immersion 20℃×24hours


SST (5%NaCl 35℃ 240hours)

 

 


50℃×98%RH×120hours

 


Sunshine weather meter 1000hours


Xenon weather meter 1000hours


Nansei Islands 1 year

JAPANESE | ENGLISH